VISIT
our New Website
www.lonestarbit.com





LS-100 Drill Rig
Detailed Part List

line



Prior to leaving for a drill site, it is important to carefully examine the checklist to ensure that you have all the items necessary to finish the job. When drilling hours from your home base, you may not be able to return home to pick-up a missing coupling, an extra drill bit or a replacement swivel seal!



Parts List

Index #Qty.Part or Sub-Assembly Name
11Mast Assembly
21Hose Assembly, Pump to Flow Control Valve
31Hose Assembly, Flow Control Valve to Entry Swivel
415-HP Rotary Engine
51Rotary Transmission (25:1 ratio, with centrifugal clutch)
61Support Bracket, Power Head
71Side Entry Swivel & Support Bracket Assembly
81Slide, Break-out Slips
92Stabilizer tubes
102Set Screw (Stabilizer Tube Locks)
111Base Assembly
123Bolt - 1/2-inch Coarse Thread: Lock-washer
131Shuttle Assembly (Support item #6)
142Hinge Pin (attaches item 6 to item 13)
151Roller Chain #40
1613 way Mud (Air) Flow Control Valve
171Winch Assembly
181Chain Tensioner Assembly
193Tie down ropes
202"C" Spanner Pipe Wrench
211Hex Spanner Wrench, Break-out
221Drag Bit, 5-7/8 inch
233Drag Bit, 3-7/8 inch
241Hole opener/Reamer, 5-7/8 inch
25Drill Pipe, 1-1/4 inc Pipe, 5 feet long
Optional Extras
261Spare Clutch, Centrifugal
272Spare Seal, Pump Shaft
282Spare Seal, Water Entry Swivel
291Tool Kit
301Suction Hose with Intake Screen & Foot Valve
311Hat, Safety
321Mud Pump (Monarch Model BSGF-8)

Notes:

  1. Items (4) and (5) are packaged assembled as a unit.
  2. Items (6), (13), (15), (16), (17) and (18) come mounted on the Mast Assembly (1).
  3. Not Shown: Container with Joint Grease; Bag with Assembly Hardware.